User Manual BDS4223V
29
6.7 CHANGING ASPECT RATIOS
Using Remote Control
1 All widescreen viewing modes are available by pressing the WIDE
key. Press this key repeatedly to cycle through all available modes:
RGB/DVI mode
Using OSD Menu
1 Press the MENU key on the monitor panel or remote control.
2 Use the SEL or SEL key to select the PICTURE option from
the menu.
3 Use the SEL or SEL key to highlight FORMAT.
4 Press the ADJ key to confirm the selection.
=> The FORMAT window is displayed.
5 Use the ADJ or ADJ key to select the desired format mode.
As you select each mode, the screen changes.
6 Press the SEL key to confirm selection.
Notes:
■ Under RGB and DVI input modes, only 16:9, 4:3 and Native modes
are available.
■ Under Component video input mode, only 16:9 and 4:3 modes are
available.
Native (1:1)
To Next Page
Loading...
