Philips BDS4223V - Built-In Amplification (Speaker)

User Manual BDS4223V
41
7.2.3 BUILT-IN AMPLIFICATION (SPEAKER)
Turning On Built-in Amplification
This monitor is equipped with a built-in amplification for optional
external speakers. You can switch the amplification ON or OFF using
the OSD. Because these speakers are general purpose, you may
consider switching them OFF during hi-fidelity playback of movies or
other content.
1 Press the MENU button on the monitor panel or remote control.
2 Use the SEL or SEL key to select the SOUND option from the
menu.
3 Press the ADJ key to confirm the selection.
=> Various options are available in the SOUND menu.
4 Use the SEL or SEL key to select the SPEAKER option.
5 Press the ADJ key to confirm the selection.
=> The SPEAKER menu appears.
6 Use the ADJ or ADJ key to optimize the sound.
● Select OFF to switch off.
7 Press the SEL key to confirm setting and return to the previous
menu.