GENERAL PRODUCT SPECIFICATION(Continued)
8639 000 15121
2003-12-19
590
15
31
C.C.Liao
Go to cover page
202P Gs3 CM25
DELL P1230 M25P
59
22" CMTR-M25P-Dell-P1230
TYPE : 6L3P10/76
OEM : Dell 130KHz
3.8 Power management
The power consumption and the status indication of the set
with power management function are as follows,
On Pulse Pulse as normal on Green
OFF No Pulse Pulse < 1 W
OFF Pulse No Pulse < 1 W
OFF No Pulse No Pulse < 1 W
Entering from ON state to Power saving state has 5
-10secondtimedelay. ItawakefromOFF
state to On state within 3 seconds.
Compliant with power saving requirement
EPA energy star requirement
E2000
3.9 Display identification
In accordance with VESA Display Channel Standard and
having DDC 2B capability
4.1 Test conditions
Unless otherwise specified, this specification is defined
under the following conditions.
(1) Input signal: As defined in 3.1
(2) Luminance setting: controls to be set to 20 ft-lb with
full screen 100 % duty cycle white signal.
(3) Warm up: more than 30 minutes after power on with signal supplied.
(4) Ambient light: 400 -- 600 lux.
(5) Ambient temperature: 23
(6) Ambient magnetic field: no special ambient magnetic field existed.
(the ac leakage flux, dc flux caused by transformer magnet, etc.)
(7) CRT face: East
STATUS Horizontal Vertical Power Spec LED
4.0 Visual characteristics
Amber
Amber
Amber
MPR-II / TCO99 / TCO'03
To Next Page
Loading...
