Philips DELLP1230 - Page 62

62
GENERAL PRODUCT SPECIFICATION(Continued)
8639 000 15121
2003-12-19
2003-12-19
590
18
31
C.C.Liao
DELL P1230 M25P
22" CMTR-M25P-Dell-P1230
TYPE : 6L3P10/76
OEM : Dell P1230 130KHz
Go to cover page
4.12 Mis-convergence
The maximum convergence error should be measured on a white
line and represents the maximum distance between the center
ofthered,greenandbluelinesoverthewholeimagearea.
Max. Mis-convergence:
(Picture area X 2 See FIG-6)
4.13 Focus check
First, adjust brightness to 50 % position and contrast to100% position, and
then
generate"ME"charactersfor1280X1024/85Hzor1600x1200/85Hz
timings
to cover entire picture area (picture size is shown in sect. 4.5). Characters s
be clearly identified at the center and all corners. Character size is shown in
FIG-7.
4.14 Brightness uniformity
With an active full area white video input pattern and contrast
setting to100%,noportionofthepatternshallbeless
Than75%oftheluminancemeasuredattheCRTcenter.
4.15 White color adjustment
There are three factory preset white color 9300 K, 6500 K and 5500 K.
Apply full white pattern, with brightness in 50 % position
andthecontrastcontrolatmax.position.
The 1931 CIE Chromaticity (color triangle) diagram (x, y)
coordinate for the screen center should be:
Y = 0.297 +/- 0.020
6500 K CIE coordinates X = 0.313 +/- 0.020
392mm 94mm
9300 K CIE coordinates X = 0.283 +/- 0.020
Y = 0.329 +/- 0.020
5500 K CIE coordinates X = 0.332 +/-0.020
Y = 0.347 +/- 0.020
Zone
From 31.5Khz to
64Khz
From 64Khz to 130Khz
(without 94Khz)
94Khz
B
0.45 0.40 0.35
A
0.35
0.30 0.25
C N/A N/A N/A