2
Press PLAY B (o) or STOP C (p) to select SET
CLOCK, then press FF g (B).
4
Press DISPLAY/STATUS/EXIT.
SET CLOCK
→ SET CLOCK
DAYLIGHT SVG TIME [ON]
SELECT op CHOOSE B
TO END PUSH EXIT
SET CLOCK
SET CLOCK
→ DAYLIGHT SVG TIME [ON]
SELECT op CHOOSE B
TO END PUSH EXIT
SELECT op CHOOSE B
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
28 Daylight-Savings Time
You may program the DVD/VCR so the VCR clock will automati-
cally move forward one hour in April and turn back one hour in
October. Daylight-Savings Time is ON when you receive your
DVD/VCR. Turn Daylight-Savings Time ON or OFF by following
the steps below. Before you begin:
● Set the clock. Details are on page 27.
● Place the DVD/VCR in VCR mode. Press OUTPUT SELECT
so the green VIDEO light appears on the front of the
DVD/VCR. Press VCR/TV so the green VCR/TV light appears
on the front of the DVD/VCR.
1
Press VCR, then press DISC/MENU.
3
Press PLAY B (o) or STOP C (p) to select DAY-
LIGHT SVG TIME. Then, press FF g (B) so OFF
(or ON) appears beside DAYLIGHT SVG TIME.
2,3
4
1
To Next Page
Loading...
