Messages on your DVD Recorder display
The following messages may appear on your DVD Recorder display. If you name a disc, the disc
name will appear on the display panel as well.
F{../T/ I I_IF
I_F_'I IZI J I_!l_l
I
No signal or poor signal strength
L_P_,_ _,o Disc tray is opening.
LLL_ __,C_ Disc tray is closing.
After a successful recording, the list of disc contents is updated.
_ _T
rn_a j P_?u_ The DVD/video cassette you are trying to copy is copy protected.LUg _
No disc has been inserted. If a disc has been inserted, then it is possible
that the disc cannot be read.
The DVD Recorder is busy making changes DVD-compadble.
_/LrJT_J_ i rF"
IIF _ 2_ZI J Z_L
Inserted disc is new or has been completely erased (no recordings
present).
,,r_,, TITLE The maximum number of titles has been reached for the disc. Each disc
can have a maximum of 48 titles.
_; DL f LILL Disc is full. There is no room for new recordings.
_TCr _cr
A disc with NTSC recordings has been inserted and an attempt was
made to record a PAL signal. Insert a new disc or use a disc containing
PAL recordings.
To Next Page
Loading...
