Assigning the VCR Plus+ ®Guide channel
numbers
If you intend to use the VCR Plus+ ® programming system, you must first assign Guide channel
numbers to the TV channels.
3
4
6
8
Press SYSTEM-MENU on the remote control. The menu bar
will appear.
Select 'T_' using • or • .
Select line 'Installation' using CH-• or CH+ • and confirm
with •.
Select the line 'VCR Plus+ Ch.' using CH-• or CH+ • and
confirm with • .
Use CH-• or CH+• to select the Guide channel number
you want to assign to a TV channel.
Use • or • , or use the number buttons 0..9 to select the TV
channel corresponding to this Guide channel number. An
overview of guide numbers/TV channels can be found in your
daily newspaper or in your TV listings.
Confirm the allocation with OK.
To end, press SYSTEM-MENU
Installation
VCRPlus+ Ch.
VCRPlus+ Ch. Channel
O0'i' ---
002 ---
003 ---
004 ---
005 ---
To exit press
SYSTEMMENU
28 Installing your DVD recorder
To Next Page
Loading...
