Playing MP3 CDs
MP3 (MPEGI Audio Layer-3) files are highly compressed pieces of music. Using this technology
the data volume can be compressed by a factor of 10. This enables you to fit up to 10 hours of
CD quality music on a single CD-ROM.
When creating MP3 CDs, keep the following in mind:
Data system supported: ISO9660
Directory structure: maximum of 8 levels
Formats: *.mp3
File names: maximum of 12 characters (8+3)
Maximum of 32 albums, 999 titles
Sampling frequency supported: 32, 44.1, 48 (kHz). Music pieces with different frequencies will be
skipped.
Bit rate supported: 32, 64, 96, 128, 192, 256 (kbit/s)
ID3 Tag: Version I, I.I. In the case of later versions, the directory name will appear as the
album and the file name as the title.
Important information regarding playback:
Only the first session of a multisession CD is played back.
1
2
Insert an MP3 CD. Playback starts automatically.
MP3 CD display
If the TV is turned on, the MP3 CD display will appear on the TV
screen.
During playback, the number of the current track will be shown on the
screen aed display.
During interrupted playback (using STOP • ), the album numbers will
be shown on the TV and on the display.
If available on the CD in a so-called ID tag, more information on album,
track, and artist will appear on the display.
Stop playback with STOP • . The number of albums appears on
the display.
Other playback functions
Select the previous or next crack with 14• or ••1 .
You can also use TIC to select tracks and albums.
1 Press TIC and then select symbol 'T' for album or 'C' for track
with • or • .
2 Select the number of the album/track with CH-V , CH+A or
the number buttons 0..9 on the remote control.
You can also use repeat functions ( PLAY MODE ).
Tip
Tip
Playback 37
To Next Page
Loading...
