Philips DVDR615 - Playing a DVD+RW or DVD+R; Playing Audio Cds

Playing a DVD+RW or DVD+R
1
2
3
4
If the inserted disc has been write-protected or it is a finalized
DVD+R, playback starts automatically.
If playback does not start automatically, select the title you want
to play from the index screen using CH- • or CH+ • ,
You can also use the I_" or I_1_1 buttons on the front of the
recorder,
Press the PLAYI_ button.
The following will appear on the display:
title/chapter number, elapsed time,
x I see the message E__P__ _:_L on the display
_" There are no recordings on this disc.
To stop playback, press STOP • on the remote control or
STOP • on the DVD recorder.
To eject the disc, press OPEN/CLOSE _ on the front of the
DVD recorder.
What do I must pay attention to with regard to recordings that
have been recorded in different recording modes?
During playback, the device will automatically switch to the proper mode
'M1, M2, M2x, M3, 1t/14,M6, M8'.
For more information, please read the section 'Selecting the recording
mode (picture quality)' in the chapter 'Manual recording'.
Problem ]
?
Playing audio CDs
_./1_ I1_I
FN II I I1_!1_! f-'lF-I
I_1_1 I
IIIIIIIIIIIIIIIIIIIII
P,_qI
I
You can also use the DVD Recorder to play audio CDs
1
2
Insert an audio CD, Playback starts automatically.
Audio CD display
If the TV is turned on, the Audio CD display will appear on the screen.
During playback, the number" of the current track will be shown on the
screen and display.
Stop playback with STOP • , Track number and total play time
are displayed.
Tip
36 Playback