Selecting daily/weekly recordings
Using SELECT, select from the following options:
'Mo-Fr': Repeated daily recordings from Monday to Friday.
'WeeM/: Repeated weekly recordings (every week on the same day).
Confirm with OK.
Timer
VCRPlus+ system
PlueC0de number
M0-Fr/Weekly To store
PressSELECT Press OK
6
xThe following message appears on the screen: 'Please enter
channel number'
¢" The channel number of the TV channel has not yet been assigned to
the PlusCode number. Using • , • or the number buttons 0..9 on
the remote control, select the corresponding channel number (name)
of the TV channel and confirm with OK.
xThe following message appears on the screen: 'PlusCode
number wrong'
"/ The entered PlusCode number is incorrect. Repeat your entry or
cancel using the SYSTEM-MENU button.
"/ Check the time/date (see 'Setting the time & date' in 'Installing your
DVD recorder').
xThe following message appears on the screen: 'Date does not
match Mon-Fru"
,/ A daily recording was entered for the wrong day. Daily programming
can only be used for recordings to be made from Monday to Friday.
The decoded data appears after confirmation. You can go back
and change the data. Select the appropriate input field with • or
<. Change the information with CH+A , CH-V or the
number buttons 0,,9.
Change 'AM/PIVr
Use the SELECT button to select 'AM' or 'P/ItT in the input fields
'Start' and 'Encf.
Changing the recording mode
Select 'RecMode' using • .
Using CH- • , select the recording mode 'M1, M2, M2x, M3, M4, M6',
M8'.
If all information is correct, press the OK button. The
information is stored in a TIMER block.
Problem
Tip
Timer
VCRPlus+ system
Rec
Date Ch. Start End Mode
01/22 001 08:30AM 10:30AM M1
AM/PM To store
PressSELECT Press OK
64 Programming a recording (TIMER)
To Next Page
Loading...
