8
5 6
7
8
9
Attach the xing plate to the inner
surface of the door, x it with 3 M6
anchor screws, and tighten them.
Align the square shaft of
the lock cylinder and the
lock-out bolt bar with the
corresponding socket on
the inside escutcheon, hide
the extra cables into the
door hole, and stick the
inside escutcheon tightly
to the door. Tighten the
anchor screws to x the
inside escutcheon.
Install the battery and
screen component.
To check whether
the rotary knob,
mechanical keys,
and all other parts
are well connected
or not.
Insert the cut lock-out bolt bar into
the buckle of the inside escutcheon,
then connect the escutcheon cable
and video cable accordingly.
Escutcheon
cable
Anchor
screw
Video cable
Attention
Please cut the length of the lock-out bolt bar to a
proper length as per the door thickness.
To Next Page
Loading...
