Controls
Controls on the system and
remote control
1
ECO POWER
– to switch the system on or to Eco Power
Standby mode.
2
STANDBY ON y
– to switch the system on or to Standby mode.
3
DISPLAY SCREEN
– to view the current status of the system.
4
DISC TRAY
5
DISC CHANGE
– to change disc(s).
6
DISC 1 / DISC 2 / DISC 3 (CD DIRECT)
– to select a disc tray for playback.
7
OPEN•CLOSE
– to open or close the disc tray.
8
INTERACTIVE VU METER
– to show the VU (volume unit) meter in music or
volume mode depending on the display mode
selected.
9
VOLUME
– to increase or decrease the volume.
0
Tape Deck Operation
AUTO REPLAY (AUTO RE.)
– to select continuous playback in either AUTO
PLAY or ONCE mode only.
DUBBING
– to dub a tape.
REC
– to start recording on tape deck 2.
!
SOUND NAVIGATION
– to select the desired sound feature : DSC or
VAC.
@
JOG CONTROL
– to select the desired sound effect for the
selected sound feature .
DSC ..................DIGITAL, ROCK, POP, NEWAGE,
CLASSIC or ELECTRIC.
VAC ..................HALL, CONCERT, CINEMA,
DISCO , ARCADE or CYBER.
#
INCREDIBLE SURROUND (IS)
– to activate or deactivate the surround sound
effect.
$
wOOx ON•OFF
– to select enhanced or normal wOOx sound
effect.
wOOx LEVEL
– to select desired wOOx level : WOOX 1,
WOOX 2 or WOOX 3.
%
ç
– to open the tape deck door.
^
TAPE DECK 2
&
TAPE DECK 1
*
SOURCE – to select the following:
CD / (CD 1•2•3)
– to select disc tray 1, 2 or 3.
TUNER / (BAND)
– to select waveband : FM, MW or LW.
TAPE / (TAPE 1• 2)
– to select tape deck 1 or 2.
AUX / (CDR/DVD)
–to select a connected external source :
CDR/DVD or AUX (auxiliary) mode .
(
Mode Selection
PLAY PAUSE ÉÅ
for CD .................to start or interrupt playback.
for TAPE..............to start playback.
for PLUG & PLAY…(on the system only) to
initiate and start plug & play
mode.
SEARCH• TUNING àá
for CD .................to search backward/forward.
for TUNER .........to tune to a lower or higher radio
frequency.
for TAPE..............to rewind or fast forward.
for CLOCK .......(on the system only) to set the
hour.
DEMO STOP/CLEAR Ç
for CD .................to stop playback or to clear a
programme.
for TUNER ........ to stop programming.
.................................(on the system only) to delete the
preset radio station.
for TAPE.............. to stop playback or recording.
................................. to reset tape counter number.
for DEMO .........(on the system only) to activate/
deactivate the demonstration.
for CLOCK.......(on the system only) to exit clock
settin
g or cancel timer
.
for PLUG & PLAY…(on the system only) to exit
plug & play mode.
PREV / PRESET / NEXT íë
for CD .................to skip to the beginning of the
current, previous, or next track.
for TUNER ........to select a preset radio station.
for CLOCK .......(on the system only) to set the
minute.
)
n
– to connect headphones.
¡
NEWS/TA
– to hear News or Traffic Announcement
automatically.
™
RDS
– to select RDS information.
£
DISPLAY
– to select different screen display mode :
NORMAL, MODE 1, MODE 2, or MODE 3.
PROG (PROGRAM)
for CD .................to programme disc tracks.
for TUNER ........to programme preset radio
stations.
for CLOCK .......(on the system only) to select 12-
or 24-hour clock mode.
CLOCK•TIMER
– to view the clock, set the clock or set the timer.
§
MUTE
– to interrupt or resume sound reproduction.
CLOCK
– to view the clock display.
•
REPEAT
– to playback track(s)/disc(s)/programme
repeatedly.
ª
SHUFFLE
– to playback all a vailable discs and their tracks/
programme in random order.
º
TIMER ON/OFF
– to activate or deactivate the timer.
⁄
SLEEP
– to activate, deactivate or set the sleep timer.
¤
B
– to switch the system to Standby mode.
– to switch the system to Eco Power Standby
mode.
Notes for remote control:
– First, select the source you wish to
control b
y pressing one of the source select
keys on the remote control (CD 123 or
TUNER, for example).
– Then select the desir
ed function (
É
,
í
,
ë
, for example).
24
25
27
To Next Page
Loading...
