Philips HD8847/19 - 7.2. Coffee Grinder Disassembly; 7.3. Grinder Blades Removal

PHILIPS 4000 07 DISASSEMBLY
2/7
To extract the top support of the appliance, press on the grinding
adjustment spindle (A) and turn the support anticlockwise until it
unhooks.
Turn the grinder blades anticlockwise out of the support.
7.3. Grinder blades
A
B
Caution in the new coee grinder with the screw, Unscrew this last,
before disassembly of the upper coee grinder support.
7.2. Coee grinder
Raise the coee grinder and remove the connections. When reassembling the coee
grinder, make sure the spring
is repositioned correctly (see
photo).
e new machines have a coee grinder with the screw to prevent
the disassembly of the upper coee grinder support (see photo).
remove the electrical connections.
For HD Models UP TO S/N.TW901645704031 see SDA_112764. For HD models from S/N.TW901645704032
and EP models the position of water level sensor has been moved to avoid its oxidation (not inserted the rub-
ber cover).