Philips HD8847/19 - Fitting and Removing Oetiker Clamps

PHILIPS 4000 07 DISASSEMBLY
7/7
For HD models move the jumper, on the
KYB interface, depending on the machine:
CMF-AMF-OTC.
For EP models the position of the jumper
is irrelevant.
Use a suitable pair of pliers to remove the clamp
(as illustrated).
Tighten the clamp as illustrated.
1) Boiler connection.
2) Other connections.
7.16. Fitting and removing Oetiker clamps
1
2
1
2