42
ENGLISH
FROTHING MILK
Warning:
Danger of burning! Dispensing may be preceded by jets of milk and
steam. Wait until the end of the cycle before removing the milk carafe.
1
Fill the carafe with milk. The milk level must be between the minimum
(MIN) and maximum (MAX) level indicators shown on the milk carafe.
Note:
Use cold (~5 °C / 41°F) milk with a protein content of at least 3% to ensure
optimum results when preparing a cappuccino. Whole milk or skimmed
milk may be used depending on individual taste.
2
Insert the carafe into the machine.
Green Green
9
Once frothed milk has been dispensed, the machine starts brewing
co ee. When the desired co ee quantity is reached, press the “
” but-
ton.
The “
” button is now programmed. Each time the button is pressed, the
saved quantity of cappuccino will be brewed.
Note:
To exit programming press the “
” button once the " " is displayed. If
the machine is in the milk programming phase, it will stop frothing milk
and start brewing co ee. To stop the brewing press the “
” button.
In this case, the quantity of cappuccino will not be saved.
To Next Page
Loading...
