78
ENGLISH
Descaling Phase
12
Press the “ ” button to start the descaling cycle.
Yellow
13
The machine will start dispensing the descaling solution at regular
intervals for about 20 minutes. The bar on the control panel shows the
cycle progress.
YellowYellow
14
When this icon is displayed, the water tank is empty.
Red
15
Remove the water tank, rinse it and ll it with fresh water up to the
CALC CLEAN level. Put it back into the machine.
Note:
The descaling cycle may be paused by pressing the “ ” button. To
resume the cycle, press the “
” button. This allows you to empty the
container or to leave the machine unattended for a short time.
16
Remove and empty the container and the milk carafe.
To Next Page
Loading...
