48
ENGLISH
GreenGreen
10
The product quantity can be saved when the icon “ ” on the left bot-
tom corner of the display is shown.
11
Press the “ ” button as soon as the desired amount of milk froth is
reached.
Frothed milk is now programmed. Each time the button is pressed, the
saved quantity of frothed milk will be dispensed.
Note:
To exit programming press the “
” button once the " " appears. In this
case, the frothed milk quantity will not be saved.
DISPENSING HOT WATER
Warning:
Danger of burning! Dispensing may be preceded by small jets of hot
water and steam. Wait until the end of the cycle before removing the
water dispensing spout.
1
Slightly tilt the water dispensing spout and insert it all the way in into
the guides of the machine.
2
Push the water dispensing spout towards the bottom while rotating
it at the same time, until it is locked in the machine as shown in the
gure.
To Next Page
Loading...
