76
ENGLISH
Preparation Phase
To perform the descaling cycle, follow the steps below.
Before descaling:
1
1 - Raise the co ee dispensing spout;
2 - Press the side buttons;
3 - Remove and empty the drip tray and the co ee grounds drawer,
then place them back.
3
1
2
2
2
Fill the milk carafe with water up to the MIN level and insert it into the
machine.
3
Press the “ ” button. The machine shows this display.
4
Press the “ ” button to access the menu.
7
The machine reminds you to insert the carafe and remove the carafe
dispenser by showing these icons.
YellowYellowYellow
Green
Yellow
5
Press the “ ” button until this display is shown.
6
Press the “ ” button to select the descaling function.