80
ENGLISH
Yellow
22
The machine warms up and performs the automatic rinse cycle.
24
Remove the small white lter and replace the INTENZA+ water lter (if
installed) in the water tank. Rinse it and ll it with fresh water up to the
MAX level. Put it back into the machine.
23
Remove the container. Disassemble and wash the milk carafe as de-
scribed in the “Weekly Cleaning of the Milk Carafe” chapter.
3
1
2
2
25
1 - Raise the co ee dispensing spout;
2 - Press the side buttons;
3 - Remove and empty the drip tray and the co ee grounds drawer,
then place them back.
Green
21
When the amount of water needed for the rinse cycle has been com-
pletely dispensed, this icon is displayed. Press the “
” button to quit
the descaling cycle.
Note:
If the water tank has not been lled up to the CALC CLEAN level,, the ma-
chine might require one more rinse cycle. Fill the water tank and put it back
into the machine. Repeat from step 20.
To Next Page
Loading...
