Storage
1
Push the cord into the cord storage compartment on the back of
the motor unit. (Fig. 44)
Environment
Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an ofcial collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 45).
Guarantee & service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you nd its phone number in the
worldwide guarantee leaet). If there is no Consumer Care Centre in
your country, go to your local Philips dealer.
Troubleshooting
This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem with
the information below, contact the Consumer Care Centre in your
country.
-
ENGLISH12
Problem Solution
When I select a
speed or press the
pulse button,
appliance does not
start to operate.
Make sure the food processor or blender jar and
its lid are assembled correctly (‘click’).Make sure
that the tool holder has been inserted properly if
you are using any accessory with the food
processor bowl. If you use the blender jar, make
sure that the handle of the blender points to one
of the four corners of the motor unit. Keep the lid
xed to avoid spillage. If you use the food
processor, make sure that the bowl handle is
directly above the closed lock symbol. The bowl
lid is correctly assembled when the projection is
locked into the slot of the bowl handle. If all parts
are assembled correctly, the appliance starts to
operate when you select a speed with the speed
selector or press the pulse button.
The
appliance suddenly
stops running.
The thermal safety cut-out has probably cut off
the power supply to the appliance because the
appliance has overheated. 1) Unplug the appliance.
2) Let the appliance cool down for 1 hour. 3) Put
the mains plug in the socket. 4) Switch on the
appliance again.
I have selected the
wrong speed for
the attachment I
want to use.
Check the colour of the attachment and choose
the corresponding speed with the speed selector.
The emulsifying
disc, balloon
beater or kneading
accessory does
not turn.
Make sure the emulsifying disc, balloon beater or
kneading accessory is assembled properly onto
the tool holder. Also make sure the food
processor bowl and the lid are assembled
properly (‘click’).
To Next Page
Loading...
