Philips IntelliVue Telemetry System Infrastructure - Environmental Specifications

IntelliVue Telemetry System Specifications
IntelliVue Telemetry System Infrastructure Installation and Service Guide 1-27
Environmental Specifications
For EMC purposes component parts of the system conform to the requirements of
EN60601-1-2:2001.
In general, the ITS is designed for use in an indoor environment and operates over
an ambient temperature range of 0
° to 55° C, excluding the patient-worn
transceiver.
The Access Point, Sync Unit, APC, and Power over Ethernet Unit, and switches are all
classified as ITE devices.
Table 1-16: ITS Environmental Specifications
Environmental Test for ITS Test Type & Limits
Applicable System
Element
Operating Temperature
0
° to 55° C
Standard and Core
APs, Remote
Antennas, Sync
Unit, APC
Operating Humidity
< 95% RH at 40°C (104°F)/
non-condensing
Standard and Core
APs, Remote
Antennas, Sync
Unit, APC
Storage Temperature
-40
° C to 60° C
Standard and Core
APs, Remote
Antennas, Sync
Unit, APC
Storage Humidity
< 90% RH at 60° C
Standard and Core
APs, Remote
Antennas, Sync
Unit, APC
Altitude (Operating and
Non-operating)
3,048 meters (10,000 ft) Standard and Core
APs, Remote
Antennas, Sync
Unit, APC