Completing ITS Installation Worksheets
IntelliVue Telemetry System Infrastructure Installation and Service Guide 2-35
AP Group Configuration Worksheet
Setting
Descriptions
For each AP Group to be established, complete a separate worksheet. The template
for this form is provided on the Documentation CD-ROM. See “Planning Your AP
Groupings” on page 2-17 for information about AP groups and how you may want to
configure them. Use the information you record in this worksheet with the
procedure entitled “Configuring AP Groups” on page 3-28.
Group Level Settings:
Document the following settings for each AP group:
• AP Group Name - Name of the AP Group
• AP Group Type - Always Smart-hopping
• AP Group Description - Optional notes regarding this AP Group
• Partnered APC - Copy APC Name from APC Configuration Worksheet for the APC
that will be associated with Access Points in this group.
• Alert Destination - IP Address of Database Server/IIC receiving alerts for this
group of APs.
AP Group Members:
Document the following settings for each AP group:
• AP MAC Address - MAC Address as labeled on the Access Point
• AP Name - Name to be assigned to this AP within the system.
• AP Specific IP Address - Specific IP address to be assigned to this AP. This IP
address needs to be the same as the IP address assigned in the Database
Server in order for statistics gathering to occur for this AP.
Blank Template Group Level Parameters
Setting Rules Value
AP Group Name
AP Group Type Smart-hopping
AP Group Description/
Area Covered (optional)
Partnered APC Enter APC Name from AP
Configuration Worksheet.
Alert Destination
(DBS IP Address)
To Next Page
Loading...