Philips IntelliVue Telemetry System Infrastructure - Page 51

Performing a Physical Space Assessment
IntelliVue Telemetry System Infrastructure Installation and Service Guide 2-9
In interleaved deployments, the RAs are located in between an adjacent Remote
Antenna and its Core AP, resulting in an “overlap” of the Core APs. An interleaved
design builds in some fault tolerance/redundancy to the RF coverage area.
The following figures represent various possible Core AP deployments.
Figure 2-7 shows a single Core AP deployment. This deployment may be made with
either none, one, or two remote Antennas.
Figure 2-5: A Linear Core AP Deployment
Figure 2-6: An Interleaved Core AP Deployment
Figure 2-7: A Single Core AP Deployment
RA 1 RA 1RA 2 RA 2
Core AP Core AP
RA 1 RA 1
RA 1RA 2 RA 2
RA 2
Core AP
Core AP