Disassembly Procedures (A1)
70 Chapter 6 - Disassembly Guide
Procedure to remove the display:
Caution Perform this step in a dust-free environment to avoid
damage to the LCD display.
1. Use a Phillips-head screwdriver to unfasten the four corner screws. These
screws also hold the LCD assembly in place.
2. Remove the display shield.
3. Remove the LCD assembly, providing access to the display window.
4. Remove the display window by carefully prying up one corner and then
peeling back.
Backlight
connector
Keypad cable
and connector
Speaker
connector
Wheel
encoder
assembly
LCD
assembly
PCB
To Next Page
Loading...
