Disassembly Procedures (A3)
Chapter 6 - Disassembly Guide 83
Rear Case Disassembly Procedures
Procedure to remove the battery:
1. Use a screwdriver to remove the three screws holding the battery cover
plate in place.
2. Grasp the strap, accessible through the opening in the top foam cover,
and gently pull the battery from its housing.
3. Remove the wire connectors from the battery clips. Remember that the
red wire is connected to the plus (+) side of the battery pack.
The + indicator is located under the foam piece.
To Next Page
Loading...
