Philips M470 - Base Settings; Deregister the Handsets

EN 31
13 Base settings
Ring settings
Note
Available only for M475.
Set the base’s ringtone volume
You can select among 5 ringtone volume
levels or [OFF].
Note
•
base is silenced for all incoming calls.
1. Press
.
2. Select [BS SETTINGS] > [RING VOLUME],
then press
3. Select a volume level, then press
to
The setting is saved.
Set the base’s ringtone
You can select from 5 ringtones.
1. Press
.
2. Select [BS SETTINGS] > [BS RINGER],
then press
3. Select a ringtone, then press
to
The setting is saved.
Deregister the handsets
1. Press .
2. Select [BS SETTINGS] > [DELETE HS],
then press
[PIN? - - - -] displays; the “- - - -” cursor
0000.
To erase a character, press .
The PIN will be masked as ****.
3.
to
The deleted handset will be removed
from the registered handsets list,
and the antenna icon will disappear.
[REGISTER] displays.
Note
• The preset PIN is 0000. If the PIN is
incorrect, the deregistration fails and
the screen returns to the previous
menu.
• A handset cannot deregister itself.
Set dial mode
The phone supports tone (DTMF) and pulse
(rotary) dial. The dial mode is preset to touch
tone dialing. If you have pulse (rotary) service,
you need to change the dial mode to pulse
dialing before using the telephone to make a
call.
1. Press
.
2. Select [BS SETTINGS] > [DIAL MODE],
then press
3. Select [TONE] or [PULSE], then press
The setting is saved.