Philips M470 - Outgoing Messages; Record Memo

EN 36
Outgoing messages
The outgoing message is the message your
caller hears when the answering machine
picks up the call. The answering machine has 2
pre-recorded outgoing message: [ANS & REC]
and [ANSWER ONLY].
Record an outgoing message
1. Press .
2. Select [ANS. MACHINE] > [TAM
SETTINGS] > [OGM SETTINGS], then
press
3. Select [ANS & REC] or [ANSWER ONLY],
then press
4. Select [RECORD MESS], then press
to
[RECORDING] displays.
5. Start recording close to the microphone
after the beep.
6. Press
to stop recording.
You can listen to the newly recorded
outgoing message on the handset.
Note
Make sure that you speak close to the
microphone when you record an outgoing
message.
Listen to the outgoing message
1. Press .
2. Select [ANS. MACHINE] > [TAM
SETTINGS] > [OGM SETTINGS], then
press
3. Select [ANS & REC] or [ANSWER ONLY],
then press
4. Select [PLAYBACK], then press
to
You can listen to the current outgoing
message.
Note
You can no longer listen to the outgoing
message when there is an incoming call.
Restore the default outgoing
message
1. Press .
2. Select [ANS. MACHINE] > [TAM
SETTINGS] > [OGM SETTINGS], then
press
3. Select [ANS & REC] or [ANSWER ONLY],
then press
4. Select [RECORD MESS], then press
to
[RECORDING] displays.
Note
In order to restore the default outgoing
message successfully, make sure that you do
not speak close to the microphone and press
to stop recording as soon as possible
when you record an outgoing message.
5. Press
to stop recording.
The default outgoing message is
restored.
Record memo
No matter the answering machine is on or
yourself.
1. Press
.
2. Select [ANS. MACHINE] > [MEMO] >
[ANSWER MODE], then press
to
[RECORDING] displays.
3. Press
to stop and save the recording
- OR -
Press
to stop the recording without
saving and return to previous menu
option.