Philips M470 - Remote Access

EN 38
Delete all old incoming messages
1. Press .
2. Select [ANS. MACHINE] > [DELETE ALL
OLD], then press
selection.
the handset.
3. Press
to return to
previous menu option.
All old messages are permanently
deleted if you press
Note
You can only delete the read messages. No
deleted messages can be recovered.
Set the answer delay
1. Press .
2. Select [ANS. MACHINE] > [TAM
SETTINGS] > [ANSWER DELAY], then
press
3. Select [TIME SAVER], [2 RINGS], [4
RINGS], [6 RINGS] or [8 RINGS], then
press
The setting is saved.
Note
Make sure that the answering machine
is switched on before this feature can be
applied.
Tip
When you access the answering machine
remotely, you are recommended to set
the answer delay to [TIME SAVER] mode.
messages. When there are new messages,
the answering machine picks up the call
after 2 rings; When there no message, it
picks up the call after 3 rings.
Set the record time
1. Press .
2. Select [ANS. MACHINE] > [TAM
SETTINGS] > [RECORD TIME], then press
3. Select [60 S], [120 S], [180 S] or
[UNLIMITED], then press
The setting is saved.
Remote access
You can operate your answering machine
when you are away from home. Simply make
a call to your phone with a touch tone phone
and enter your 4-digit PIN code.
Note
The remote access PIN code is the same as
your system PIN. The preset PIN is 0000.