13
English
3139 115 20961
Notes:
– Do not connect equipment to both the
LINE OUT and AUX/CDR IN terminals at the
same time. Otherwise, noise will be generated and
malfunction might occur.
– If you are connecting equipment with a
monaural output (a single audio out terminal),
connect it to the AUX/CDR IN left terminal.
Alternatively, you can use a “single to double” cinch
cable (the output sound still remain mono).
Digital audio connection
DIGITAL IN
Use a coaxial cable to connect the
DIGITAL IN terminal to the digital coaxial
output of any digital audio equipment (CD
player or DVD player, for example); for recording
from this source.
Press AUX to select “AUX DIGITAL” for this
input.
Subwoofer out connection
Connect the subwoofer to the SUBWOOFER
OUT terminal. The subwoofer reproduces just
the low bass sound effect (explosions or the
rumble of spaceships, for example).
Inserting batteries into the
remote control
Insert two batteries (Type R06 or AA) into the
remote control with the correct polarity as
indicated by the "+" and "-" symbols inside
the battery compartment.
CAUTION!
– Remove batteries if they are exhausted
or will not be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances, so
they should be disposed off properly.
Preparations
pg 001-039/MC90/37-Eng 1/30/02, 8:58 AM13
To Next Page
Loading...
