Philips MC-90 - Demonstration Mode; Switching the System on; Switching the System to Standby Mode; Display Screen Selection

18
English
3139 115 20961
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
To activate the demonstration
● In standby mode, press and hold Ç on the
system until "DEMO ON" is displayed.
➜ The demonstration will begin.
To deactivate the demonstration
● Press and hold Ç on the system until
"DEMO OFF" is displayed.
➜ The system will switch to standby mode.
Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to standby mode.
Switching the system on
In standby/demonstration mode
● Press STANDBY ON to switch on the last
selected source.
● Press CD 1•2•3 (CD 123), TUNER, CDR or
AUX.
● Press any one of the disc CD OPEN•CLOSE
buttons or CDR OPEN•CLOSE.
➜ The system will switch to the respective CD
or CDR mode.
Switching the system to standby
mode
In demonstration mode
● Press and hold Ç on the system.
In any other source mode
● Press STANDBY ON (or B on the remote
control).
➜ The clock will appear on the display when the
system is in standby mode.
Display screen selection
Dim mode
You can select the desired brightness for the
display.
● Press DIM repeatedly to select DIM 1, DIM 2,
DIM 3 or DIM OFF display mode.
➜ DIM is shown, except for DIM OFF mode.
DIM
mode
OFF
1
2
3
LEDs
on
partially on
off
off
Brightness
normal
normal
normal
half
Music level
bar
active
off
off
off
+ music level bar
Clock display mode
The clock will always appear on the display
regardless of any source mode (except Eco
Power standby and demonstration mode).
● Press CLOCK/TIMER (or CLOCK on the
remote control) once.
➜ The clock is displayed. If the clock has not
been set, "--:--" is displayed.
● To return to normal display mode, press
CLOCK/TIMER again.
Notes:
– If you pressed any keys in clock display mode,
the display will briefly show the information related
to the selected mode.
– If you pressed CLOCK/TIMER while in recording
or menu modes, the clock display will only show for
a few seconds.
Basic Functions
pg 001-039/MC90/37-Eng 1/30/02, 8:58 AM18