31
English
3139 115 20961
Radio Reception
Tuning to radio stations
1 Press TUNER to select TUNER mode.
➜ "TUNER" is displayed. A few seconds later, the
current radio frequency will appear on the
display.
2 Press TUNER again to select the desired
waveband : FM or AM.
3 Press and hold à or á until the frequency
indication starts to change, then release.
➜ The display will show "SEARCHING" until a
radio station with sufficient signal strength is
found.
➜ If an FM station is received in stereo, will
appear on the display.
4 Repeat step 3 if necessary until you find the
desired radio station.
● To tune to a weak station, press à or á briefly
and repeatedly until optimal reception found.
Storing preset radio stations
You can store up to 40 preset radio stations in
the memory.
Automatic Preset Programming
● Plug and Play setting (refer to “Basic Functions -
Plug and Play”).
OR
1 Press TUNER to select TUNER mode.
To begin automatic preset from a desired
preset number
● Adjust JOG CONTROL (or pressí or ë
on the remote control) to select the desired
preset number.
➜ If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
2 Press and hold PROG until "AUTOPROGRAM" is
displayed.
➜ PROG starts flashing.
➜ All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by AM band.
➜ When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
EDIT TEXT
DISPLAY
REC LEVEL
CLOCK/TIMER
SEARCH/
TUNE TUNE
SEARCH/
EnterCancel
STOP
PROG
JOG CONTROL
COPY CD
COMPILE CD
ERASE
CD
CDR
TUNER
AUX
FINALIZE
CD
PLAY/
PAUSE
RECORD
MC
-
CD RECORDABLE MICRO SYSTEM
CD 1• 2• 3
STANDBY
-
ON
PREV
PRESET
NEXT
PRESET
iR
MASTER VOLUME
CDR
OPEN•CLOSE
TREBLE
BASS
YESNO
CD TEXT
DIM
pg 001-039/MC90/37-Eng 1/30/02, 8:59 AM31
To Next Page
Loading...
