Philips MC-90 - Controls; Controls on the System and Remote Control

14
English
3139 115 20961
Controls (main system’s illustration on page 3)
Controls on the system and
remote control
1 STANDBY ON y
– to switch the system on or to standby mode.
2 Display screen
– to view the current status of the system.
3 CD changer tray (CDC)
4 CD OPEN•CLOSE (CD 1/CD 2/CD 3) 0
– to open or close the individual disc tray :
CD 1, CD 2 or CD 3
5 Source selection – to select the following :
CD 1•2•3 (CD 123)
– to select disc tray 1, 2 or 3.
TUNER
– to select waveband : FM or AM.
CDR
– to select CD recorder.
AUX
– to select the input for an additional appliance.
6 REC LEVEL
– to activate/deactivate the auto level control.
– to activate the volume control for record level
adjustment.
7 CLOCK/TIMER
– to select clock or timer function.
8 MASTER VOLUME (rotary)
(VOLUME +/-)
– to increase or decrease the volume.
– (on the system only) to increase or decrease the
low or high tone level for the respective BASS or
TREBLE sound feature selected.
– (on the system only) to adjust the record level.
– (on the system only) to adjust the hour and
minutes for clock/timer settings.
5
§
≥
•
∞
™
ª
8
&
9
0
º
8
¤
‹
›
fi
fl
⁄
‡
(
)
£
¡
^
(
Notes for remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (CD 123 or
TUNER, for example).
– Then select the desired function ( É , í ,
ë , for example).
pg 001-039/MC90/37-Eng 1/30/02, 8:58 AM14