32
English
3139 115 20961
To stop storing the automatic preset
● Press PROG or Ç on the system.
Note:
– If no preset number is selected, automatic
preset will begin from preset (1) and all your
former presets will be overridden.
Manual Preset Programming
1 Tune to your desired radio station (refer to
“Tuning to radio stations”).
2 Press PROG.
➜ PROG starts flashing.
➜ The next available preset number is displayed
for selection.
To store the radio station to another
preset number
● Adjust JOG CONTROL (or pressí or ë
on the remote control) to select the desired
preset number.
3 Press YES to store the radio station.
➜ PROG disappears.
● Repeat steps 1–3 to store other radio stations.
To exit manual preset mode
● Press Ç on the system.
Notes:
– If you attempt to store more than 40 preset
radio stations, "PROGRAM FULL" is displayed.
– During programming, if no key is pressed within
20 seconds, the system will exit the Program mode
automatically.
Radio Reception
Tuning to preset radio stations
● Once you’ve programmed the radio stations,
adjust JOG CONTROL (or pressí or ë on
the remote control) to select the desired preset
number.
➜ The preset number, radio frequency, and
waveband are displayed.
Erasing a preset radio station
1 Adjust JOG CONTROL (or pressí or ë
on the remote control) to select the preset
radio station to be erased.
2 Press and hold Çon the system until “PRESET
DELETED” is displayed.
➜ The deleted radio frequency remains on the
display.
➜ The preset numbers of all other preset radio
stations in the band with higher numbers are
also decreased by one.
● Repeat steps 1–2 to erase other preset radio
stations.
pg 001-039/MC90/37-Eng 1/30/02, 8:59 AM32
To Next Page
Loading...
