Philips MCD2010 - 3 Before Use; Place the Unit; Connect

11
English
EN
3 Before use
Place the unit
Note
• Risk of overheating! Never install this apparatus in a
conned space. Always leave a space of at least 4 inches
around this apparatus for ventilation. Ensure curtains or
other objects never cover the ventilation slots on this
apparatus.
• Place this unit on a at, hard, and stable surface.
• Never place this unit in an enclosed cabinet, nor on any
other electrical equipment.
• Do not insert any object other than indicated into
ventilation openings nor other openings.
• Install this unit near the AC outlet where the AC power
plug can be easily reached.
• To avoid magnetic interference or unwanted noise,
never place the main unit and speakers too close to
any radiation devices.
1 Place the unit near to the TV.
2 Place the speakers at a suitable
distance from the TV and at an angle
of approximately 45 degrees from the
listening position.
Connect
Connect speakers
1 Insert the speaker wires completely into
the speaker input sockets on the back of
the unit.
Note
• For optimal sound, use the supplied speakers only.
• Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specications section of this manual.
Connect TV
Connect the audio and video cables to
the output sockets on the unit and the
corresponding input sockets on your TV.
Select the best video connection that your TV
supports.
Connect through a composite video cable
MCD2010_93_UM_V3.2.indb 11 7/1/2013 2:39:23 PM