Philips MCD2010 - Setup; General and Video Setup

20
EN
7 Setup
1 After you press the button .
» The home menu appears.
2 Select to access the system menu.
Note
• You cannot change a menu option that is grayed out.
• To return to the previous menu, press . To exit the
menu, press again.
General setup
1 Press button.
2 Select to access the setup menu.
3 Select to access the [General Setup]
options.
• [Disc Lock]: Turn Disc lock.
• [OSD Language]: Select an on-screen
display menu language.
USB
Disc
Setup
General
Disc Lock
OSD Language English
Off
Register
Sleep
DivX(R) VOD Code
Video
Audio
Preference
• [Sleep Timer]:Sets a sleep timer to
switch the home theater to standby
after a specic time.
• [DivX(R) VOD Code]: Get registration
code of DivX Video On Demand
Registration.
Note
• If you select a language which is not available on a disc,
this unit uses the default language of the disc.
Video Setup
1 Press button.
2 Select to access the setup menu.
3 Select to access the [Video Setup]
options.
• [TV System]: Selects a TV system that
is compatible with the TV.
• [Aspect Ratio]: Set screen display
format(Pan Scan, Letter Box or Wide
Screen).
• [Progressive]:Enables or disables
progressive scan mode.
• [Picture Settings]: Select a predened
color setting or set the color manually.
Audio Setup
1 Press button.
2 Select to access the setup menu.
3 Select to access the [Audio Setup]
options.
• [Analogue Output]:Selects the analog
audio setting based on the audio
device that is connected through the
analog audio jacks.
• [Digital Audio]:Select audio formats
supported by the connected device.
• [Sound Mode]: Selects a preset sound
effect to enhance the audio output.
MCD2010_93_UM_V3.2.indb 20 7/1/2013 2:39:35 PM