Circuit Descriptions, Abbreviation List, and IC Data Sheets
EN 31LGE PDP 9.
9.10 IPM (Intelligent Power Module)
9.10.1 Purpose
Attached at Z board and Y board, to make Sustain waveform.
Sustainer: supply a square wave to the PDP to make video.
Figure 9-14 Intelligent Power Module
Figure 9-15 Sustain pulse (061)
9.10.2 Main Components
Heatsink, capacitor, diode, IC, resistor, transistor, and FET.
9.11 Abbreviation List
AC Alternating Current
B/D Board
CLK Clock signal
CTRL Control (board)
DC Direct Current
FET Field Effect Transistor
FPC Flexible Printed Circuit
I/O Input/Output
IC Integrated Circuit
IPM Intelligent Power Module
LED Light Emitting Diode
LGE Lucky Goldstar Electronics (supplier)
MCM Multi Chip Module
PCB Printed Circuit Board (same as PWB)
PDP Plasma Display Panel
PFC Power Factor Corrector circuit
PSU Power Supply Unit
PWB Printed Wiring Board (same as PCB)
RGB Red, Green, Blue colour space
STB Stand-by signal
TCP Tape Carrier Package
9.12 IC Data Sheets
Not applicable
F_15590_062.eps
050705
IPM
F_15590_061.eps
050705
To Next Page
Loading...
Need help?
General