Mechanical Instructions
EN 21Q552.2L LA 4.
2012-Mar-16
back to
div. table
4.4.7 LCD Panel
Refer to Figure 4-22
to Figure 4-24 for details.
1. Remove the SSB as described earlier.
2. Remove the PSU as described earlier.
3. Remove the tweeters with their subframes and subwoofer
as described earlier.
4. Remove the stand and -subframe as described earlier.
5. Remove the cables [1].
6. Remove the mains switch subframe [2].
7. Remove the keyboard control-, and IR & LED board as
described earlier.
8. Remove all remaining cables and subframes.
9. Use a screwdriver to release the catches [3] that secure the
panel.
10. Use a screwdriver to release the catches and remove the
sidewings [4] that secure the panel.
11. Take the panel out.
Remove the clamps from the panel before sending the panel in
for Service.
Figure 4-22 LCD panel [1/3]
Figure 4-23 LCD panel [2/3]
To Next Page
Loading...
