Philips Respironics SimplyGo - Page 27

24
SimplyGo User Manual
Visual, Audio
Indicators
Description What To Do
A single long
beep
High Breath Rate Alarm
This alarm indicates that
the user’s breath rate is
exceeding the capacity
of the device� The device
is still working properly
and is still providing
oxygen at the max 2 LPM
capacity of the device�
Note: This alarm could
take up to 2 minutes to
activate from the time
the alarm condition is
present�
The indicator resets
itself when the breath
rate is reduced�
If this indicator
regularly occurs,
contact your home
care provider�