Philips Respironics SimplyGo - Page 28

25
SimplyGo User Manual
English
Visual, Audio
Indicators
Description What To Do
A sequence of
3 short beeps
+
3 long beeps
that repeats every
4 seconds
Technical Fault Alarm
This alarm occurs when
the device has a general
malfunction and the
device is no longer
operating properly�
The device may or
may not shut down
depending on the
severity of the alarm�
This alarm can be
silenced if the
symbol appears
on-screen�
Note: The amount of
time it can take for the
alarm to activate from
the time the alarm
condition is present
will vary depending on
the technical fault that
occurs�
Change to another
source of oxygen and
contact your home
care provider�