Settings 37
Sleep mode – With this function, the projector
automatically goes to ECO mode after a specified
period of time or at the end of a movie.
Auto Power Down (APD) – turn on/off the auto
power down.
The default setting is depending on the choice of:
- shop mode: APD off,
- dome mode on: APD off,
- home mode: APD on.
When the parameter is switched on, it works like
this:
- it should go into off mode after 3 hours.
If a video is displayed, the APD should take place 3h
after last user action, meaning that a pop-up will
appear after 2h58 for 2 minutes, indicating that the
product will go into off mode.
HDMI name – select this item to change the HDMI
names. Name that appears on the main screen.
Language/Language
Menu language – use / to select the desired
language and press OK to confirm.
Soundtrack – use / to select the desired lan-
guage and press OK to confirm.
Sub Title – use / to select the desired lan-
guage and press OK to confirm.
Maintenance
Reset settings – Reset settings to factory defaults.
Firmware Update – Update Firmware
Information – Display free space in the internal
memory and information on the device (Capacity: /
Free space: / Firmware version: / Device name: /
Model:)
Demo mode – switching demo mode on and off. In
this mode, Screeneo is continuously displayed on
the screen and video and/or audio files placed in
internal memory are read directly.
Screeneo_User-Manual_HDP16x0_V1-1_EN-US_253634032-A.book Page 37 Jeudi, 18. décembre 2014 8:56 08
To Next Page