Why does my Philips Projector only show the initial screen?
If only the initial screen appears and not the image from the external device on your Philips Projector, check that the cables are connected to the correct sockets, the external device is turned on, the video output of the external device is turned on, and the correct HDMI input (HDMI 1 or HDMI 2) is selected.
Why screen mirroring does not work with Android device on Philips Screeneo S6?
Screen mirroring might not work with your Android device because not all Android devices support Miracast, which is required for screen mirroring. Check your Android device's user manual to see if it supports Miracast (also known as Screencast, Screen Sharing, WiFi Direct, Wireless Display, etc.) and how to enable it. You can also install the HappyCast app on your smartphone and follow the instructions given in the app.
Is it normal that my Philips Projector is warm?
For this projector it is normal to generate moderate heat during operation.
How to turn off Philips Projector?
To turn off the Philips Projector, press and hold the power button for longer than ten seconds. If this does not work, disconnect the power cable.
Instructions for placing and connecting the projector safely, avoiding hazards.
Provides guidelines for positioning the projector for optimal viewing in different configurations.
Instructions for connecting the projector to a power source using the adapter and cable.
Steps for turning on the projector and initial configuration.
Guides through the initial setup process, starting with language selection.
Steps to connect the projector to a wireless network for online access.
Instructions for pairing and streaming audio from a Bluetooth device to the projector.
Guides on wirelessly streaming audio from the projector to a Bluetooth speaker.
How to connect external devices like Blu-ray players or consoles via HDMI.
Steps to wirelessly mirror an iPhone or iPad screen to the projector.
Guides on wirelessly mirroring a Mac's screen to the projector.
Steps to wirelessly mirror an Android device's screen using the HappyCast app.
Guides on wirelessly mirroring a Windows PC's screen using the HappyCast app.
Instructions for placing and connecting the projector safely, avoiding hazards.
Provides guidelines for positioning the projector for optimal viewing in different configurations.
Instructions for connecting the projector to a power source using the adapter and cable.
Steps for turning on the projector and initial configuration.
Guides through the initial setup process, starting with language selection.
Steps to connect the projector to a wireless network for online access.
Instructions for pairing and streaming audio from a Bluetooth device to the projector.
Guides on wirelessly streaming audio from the projector to a Bluetooth speaker.
How to connect external devices like Blu-ray players or consoles via HDMI.
Steps to wirelessly mirror an iPhone or iPad screen to the projector.
Guides on wirelessly mirroring a Mac's screen to the projector.
Steps to wirelessly mirror an Android device's screen using the HappyCast app.
Guides on wirelessly mirroring a Windows PC's screen using the HappyCast app.
General| Native aspect ratio | - |
|---|---|
| Projection distance | 0.48 - 2.85 m |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:9 |
| Contrast ratio (typical) | 150000:1 |
| Screen size compatibility | - \ |
| Projector native resolution | 2160p (3840x2160) |
| Light source type | LED |
| Service life of light source | 30000 h |
| Full HD | Yes |
| Throw ratio | 1.2:1 |
| Focal length range | - mm |
| Internal storage capacity | 16 GB |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
| Bluetooth version | 4.0 |
| Ethernet LAN (RJ-45) ports | 1 |
| Placement | Desktop |
| Product type | Short throw projector |
| Product color | Silver |
| Market positioning | Home cinema |
| RMS rated power | 14 W |
| Number of built-in speakers | 2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC adapter output voltage | 19.5 V |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 150 W |
| Noise level | 32 dB |
| Certification | CE |
| High Dynamic Range (HDR) technology | High Dynamic Range 10 (HDR10) |
| Processor cores | 4 |
Weight and Dimensions| Depth | 231 mm |
|---|---|
| Width | 228 mm |
| Height | 140 mm |
| Weight | 2500 g |
To Next Page