42
3 Speak your message.
Press
to end recording.
10.6 Outgoing messages
This is the message your callers
hear on the answering machine.
There are two pre-recorded
outgoing messages, or you can
record your own.
10.6.1 Answer & Record
The caller can leave a message.
The pre-recorded message is
“This is an answering machine,
please leave your message after
the tone.”
10.6.2 Answer Only
The caller can listen to your
announcement but cannot leave
a message. The pre-recorded
message is “This is an answering
machine, please call back later”.
10.6.3 Set answer mode
Set your machine to Answer &
Record or Answer Only.
1 Press scroll to
ANSW MACHINE
and press
.
2 Scroll to
ANSWER
MODE
and press .
The current answer mode is
displayed.
3 Scroll or to select
ANSWER & RECORD
or
ANSWER ONLY
and press
4 Scroll or to display
the message type you want :
PERSONALISED
to set your
own recorded message or
PREDEFINED
for the pre-
recorded message.
5 Press to confi rm.
If you select
PERSONALIZED
, see
following paragraph.
10.6.4 Record, play or
delete your own
outgoing message
Answer & Record invites your
callers to leave a message.
Answer Only lets callers hear
your announcement but they
cannot leave a message.
Using your answering machine
To Next Page
Loading...
