48
13 Frequently asked
questions
Charging
The
icon is not blinking
when the handset is placed
on the base
• Bad battery contact – move
the handset slightly.
• Dirty contact – Clean the
battery contact with a cloth
moistened with alcohol.
• Battery is full – no need to
charge.
Calls
No dialling tone
• No power – check the
connections. Reset the
phone : unplug and plug back
in the mains.
• Batteries are empty – charge
the batteries for at least
24 hours.
• You are too far from the base
– move closer to the base.
• Wrong line cable – use the
line cable provided.
• Line adaptor (when needed)
is not connected to the
line cord – connect the line
adaptor (when needed) to
the line cord.
Poor audio quality
The base is too close to
electrical appliances, reinforced
concrete walls or metal
doorframes – move the base at
least one metre away from any
electrical appliances.
The
icon is blinking
• Handset is not registered
to the base – register the
handset to the base.
• You are too far from the base
– move closer to the base.
No ring tone
The ring tone is deactivated.
Increase the volume.
Frequently asked questions
www.philips.com/support
To Next Page
Loading...
