44 Settings
Table of contents
1
In stop mode (start-up screen), press MENU.
2
Press the h / b key to select the record settings menu Ó.
3
Press + / – to select the Voice Activation function.
4
Press the record key, g, to confirm.
5
Press + / – to select the On function.
6
Press the record key, g, to confirm.
7
Press h / b to switch between voice activation level 1 (very
sensitive, the device switches on at low volume) and level 9 (lowest
sensitivity, the device turns on at higher volume). Press + / – when
the device is in recording mode to adjust the voice activation level.
8
Press the record key, g, to confirm.
X If this feature is on, the ‚ icon is displayed.
9
Press + / – to select the Off function to turn o voice-activated
recording.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.1.12 Setting auto divide
You can automatically divide large recordings, such as a multi-hour
meeting recording. Once the set time has been reached, the device
stops the current recording and automatically starts a new one.
1
In stop mode (start-up screen), press MENU.
2
Press the h / b key to select the record settings menu Ó.
3
Press + / – to select the Auto divide function.
4
Press the record key, g, to confirm.
5
Press + / – to select if you want to record to a new file every 30 or
60 minutes, or turn o this feature.
6
Press the record key, g, to confirm.
7
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
To Next Page
Loading...
