50 Settings
Table of contents
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.3.5 Alarm clock
You can use the device as an alarm clock or an appointment reminder.
The alarm goes o or a selected file is played at a pre-set time.
1
In stop mode (start-up screen), press MENU.
2
Press h / b to select the device settings menu ×.
3
Press + / – to select the Alarm function.
4
Press the record key, g, to confirm.
5
Press + / – to select the Set time function to set the alarm clock.
6
Set date and time as described (see also chapter 9.3.1 Set date &
time, page 48).
7
Press the record key, g, to confirm.
8
Press + / – to select the Set source function to set the alarm clock
signal.
9
Press + / – to select between an alarm signal, selected recording, or
a set radio station to be played as an alarm sound.
10
Press the record key, g, to confirm.
X If this feature is on, the ¿ icon will be displayed.
11
Press + / – to select the Off function to turn o the alarm-clock.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.3.6 Enabling/disabling key and signal tones
1
In stop mode (start-up screen), press MENU.
2
Press h / b to select the device settings menu ×.
3
Press + / – to select the Device sounds function.
4
Press the record key, g, to confirm.
5
Press + / – to enable/disable the key and signal tones.
6
Press the record key, g, to confirm.
7
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
To Next Page
Loading...
Need help?
General
