Philips VoiceTracer DVT4010 - Device Settings

48 Settings
Table of contents
9.3 Device settings
9.3.1 Set date & time
The date and time entered are saved with each recording as the
recording time.
1
In stop mode (start-up screen), press MENU.
2
Press h / b to select the device settings menu ×.
3
Press + / – to select the Date/time function.
4
Press the record key, g, to confirm.
5
Press + / – to set the year.
6
Press b.
7
Press + / – to set the month.
8
Press b.
9
Press + / – to set the day.
10
Press b.
11
Press + / – to switch between the 12/24-hour system.
12
Press b.
13
Press + / – to set the hours.
14
Press b.
15
Press + / – to set the minutes.
16
Press the record key, g, to confirm.
17
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.3.2 Enabling/disabling ClearVoice
Turn on the ClearVoice function for better playback quality. Dynamic
emphasis on quiet passages to improve the intelligibility of quiet
voices.
1
In stop mode (start-up screen), press MENU.
2
Press h / b to select the device settings menu ×.
3
Press + / – to select the ClearVoice function.
4
Press the record key, g, to confirm.