Philips VR608/07 - Switching the Modulator On;Off

ENGLISH SWITCHING THE MODULATOR ON / OFF
49
49
SSwwiittcchhiinngg tthhee mmoodduullaattoorr oonn // ooffff
If picture and sound interference cannot be removed by optimising the
modulator, the integral modulator can be switched off.Warning: this is
only possible if you have connected the video recorder to the TV set
with a scart cable. It is not possible to operate with the modulator swit-
ched off without a scart cable.
FFOORR
EEXXPPEERRTTSS
6 Confirm the new modulator frequency with
OOKK
. In the display there will briefly
appear OK.The screen will show STORED
SSwwiittcchhiinngg ooffff tthhee mmoodduullaattoorr
If you have connected the video recorder to the TV
set with a scart cable, you can switch off the
modulator when there is interference with the
picture or sound (see below).
1 Switch the video recorder on and make sure
there is no cassette in the video recorder
3 The video recorder will now transmit a test
image on this frequency
2 Press simultaneously the
SSTTOOPP
button h on
the remote control and the
SSTTOOPP//EEJJEECCTT ??
button on the front of
the video recorder until the modulator
frequency of the set appears in the display
(e.g.:M583 for 583 MHz)
4 Use
==PP--
or
;;PP++
to select the option
MODULATOR
6 Confirm with
OOKK
. In the display there will
briefly appear OK.The screen will show the
message STORED
5 Use
PP
or
QQ
to select the setting ON
(Modulator on) or OFF (Modulator off)
M583
OPTIMIZE MODULATOR
OPTIMIZE FREQUENCY Q583P
MODULATOR ON
EXITPMENU STOREPOK
?