EasyManua.ls Logo

Philips VTR5100 - 4 Start to Use; Power On;Off

Philips VTR5100
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26 EN EN 27
English
4 Start to use
4.1 Power on/off
If the device shall be idle for a long time, please slide the
power switch to OFF position.
If the device cannot work normally, please make sure the
device is not out of electricity.
When the device is recording, please do not cut off the
power, otherwise damaged file or malfunction may be
resulted.
When the battery indicator “ ” is displayed, please
charge the device promptly.
Please charge battery in advance if you need to record
for a long time. A fully charged battery will allow you to
record for approx 6.5 hours.
Note
Note
To power on/off,
1 Slide the on/off switch on the side of the device in the ON
position,
The device turns on and the start-up screen is
displayed; the device starts automatically and then
displays “PHILIPS”, as shown below.
2 Press the ON/OFF switch to power the device on/off.
Please recharge the device for three hours before using it
for the first time! (See also chapter 4.2 Charging battery,
page 28.)

Related product manuals