36 EN EN 37
English
2 Press or to select “12H” or “24H” format.
3 Press MENU to confirm and enter the system time setting
interface, as shown in the following figures:
4 In this state, press VOL to switch among the year, month,
date, hour, minute and second. The number will flash in
the state of setting, press or to adjust the numerical
value.
5 Press MENU to save the current time/date settings and
enter the next menu.
12h 24h
You can use this function to start a recording at a specified
date and time.
Short press the MENU button as shown in the following
7.7 Record timer
figures:
The setting method refers to “Set date & time”.
12h 24h
It is used to set time duration of auto recording. Device will
automatically save recording when reachs the preset time.
1 Short press on the MENU to enter the duration setting, as
shown in the following figures:
7.8 Duration
To Next Page
Loading...
