For your safety
106986_en_01 PHOENIX CONTACT 7
1 For your safety
1.1 Field of application
The THERMOFOX is a portable thermal transfer printer for industrial use. The
thermal transfer printer prints self-adhesive and non-adhesive labels and heat-
shrinkable tubes for marking electrical components. The THERMOFOX uses spe-
cial material cartridges that contain the material as well as the corresponding ink
ribbon. Only use material cartridges that are provided for the THERMOFOX by
Phoenix Contact.
1.2 Safety notes
Risk to operational reliability
Incorrect operation or modifications to the device can endanger your safety or
damage the printer. Do not repair the product yourself. If the device is defective,
please contact Phoenix Contact.
Explosion hazard, fire hazard, and health hazard if batteries are used incor-
rectly
– Only use dry batteries in a proper condition.
– Never damage the batteries (e.g., by throwing, pressing on the battery or using
sharp objects). Never expose the batteries to high levels of heat (e.g., caused
by fire or sunlight). Never let the batteries come in contact with moisture or salt
water.
– Pay attention to the correct polarity when inserting the batteries.
– Only charge the battery in the THERMOFOX or in the designated charger
(THERMOFOX/CHARGER, 0805012). Do not use any other chargers, e.g.,
cigarette lighter socket in the car.
– Temperature range when charging the battery: 0°C ... 45°C
– Store the battery separately in a dry and cool place.
To Next Page
Loading...
Need help?
General
